Contact Us

Hughes 4200 Portable Data Terminal

Portable Satellite VoIP and IP Data Terminal with WLAN Access Point


The Hughes 4200 Portable Data Terminal (Hughes 4200 PDT) provides EchoStar Mobile users in all EU member states — as well as Norway and Switzerland — with connectivity to VoIP and IP data services supported by GMR-1 3G. The Hughes 4200 PDT is fully approved for operation on EchoStar Mobile’s mobile satellite services (MSS) platform and the EchoStar XXI S-band satellite, providing high performance connectivity for users — including those in remote locations.


  • Self-contained battery-operated unit with internal flat panel S-band satellite antenna
  • Audio aid for antenna pointing, along with signal quality display and attached compass
  • Simultaneous use of Ethernet and Wi-Fi for IP data
  • Supports WPA and WPA-2 encryption over Wi-Fi
  • Internal multi-language web user interface (WebUI) for configuration and control
    • WebUI is accessible via PCs and smartphones
  • Supports NAT, NAPT and DHCP
  • Multi-user capability
  • High-capacity battery
  • Voice over IP:
    • Supports one POTS port
    • Supports SIP clients over Wi-Fi and LAN


  • Packet connections at data rates supported b y GMR-1 3G
    • Physical-layer data rates: Up to 290 Kbps forward and 256 kbps return
    • Multiple Quality of Service levels
  • Bandwidth-eff icient Voice over IP (VoIP)

In the Box

  • Hughes 4200 Portable Data Terminal
  • AC/DC adapter
  • Ethernet cable
  • Quick Start Guide


Technical Specifications

Weight 2 kg
Dimensions233 mm x 293 mm x 51 mm
Humidity95% RH at 40° C
Power (max)57 W (when transmitting)
Temperature-5° C to +40° C with battery
-25° C to + 55° C, excluding battery
Storage-40° C to +60° C with battery
-40° C to +80° C, excluding battery
Battery Charging0 to 40° C
External SupplyAC/DC adapter
Wind Loading40 km/h with stand secured
Vibration (non-op)200Hz-2kHz @, 0.3 m2/s3
Other Features
  • Rechargeable lithium-ion battery
  • SIM card slot
  • Mounting points
  • Compass



If the software is 5.1.x.y then a special procedure must to be done to upgrade the terminal. Contact Hughes/EM Support team for further details: [email protected]